Announcement

Collapse
No announcement yet.

Ignition Coils?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Ignition Coils?

    Going to change coils and the ones I'm going to use are a little short of lining up to the second hole. Do both ends have to be on metal or can one be free?
    Just the way that they all look, I'm assuming that the ends that bolt are for ground.

    #2
    Originally posted by ghainjr1
    Going to change coils and the ones I'm going to use are a little short of lining up to the second hole. Do both ends have to be on metal or can one be free?
    Just the way that they all look, I'm assuming that the ends that bolt are for ground.
    One mounting point is good enough for the ground but vibration could end up being a problem.

    Comment


      #3
      i have 2 mismatching coils and one is only bolted by 1 bolt. never had a problem.

      Comment


        #4
        I was thinking the same thing about vibration. I'll fab something at work to be able to secure the other end. Thanks, Greg

        Comment


          #5
          81 Gs1100e

          Put a set of 90 gsx-r750 coils on and is running much better but also a lot hotter. Just me or I guess burning better is going to get hotter!

          Comment

          Working...
          X