Announcement

Collapse
No announcement yet.

stalling problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    stalling problem

    hey fellas.. anyone out there have this problem?

    bike idles fine warming up.. and runs fine through the gears on the road, but once the engine warms up, it wants to stall.. its ****ing me off cause the bike was running fine, and then started doing this sheet out of the blue.. i had initially thought i had bought some bad gas, but that's been ruled out now.. i also recently replaced my floats, but the bike still ran fine for a while before acting up.. actually failed my road test the other day cause i had to keep giving the bike gas through the cones and it screwed me all up... it just sucks not having piece of mind about your bike.. anyone have any ideas? [-o<

    #2
    Check venting in your gas cap and flow through your petcock. Does it do it with your petcock on prime?
    1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
    1985 GS1150ES stock with 85 Red E bodywork.

    Comment


      #3
      interesting

      you mean if i switch the thing to prime and the problem goes away, i have a vacuum problem?? as far as gas cap venting, i had my tank off one day while i was working on my bike and at some point i tipped the thing on its side and gas started flowing down the side with the cap supposedly snugged up... is this abnormal for a '79er?? maybe i need a new gasket??

      Comment


        #4
        You could have a bad petcock if your bike runs well on prime.
        1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
        1985 GS1150ES stock with 85 Red E bodywork.

        Comment

        Working...
        X