X
Announcement
Collapse
No announcement yet.
Lost Key
Collapse
X
-
xmishx
Lost Key
So I've searched everywhere for the key to my bike, but it seems to be nowhere. What are my options if I in fact do not find the key, to of course start the bike, fill the tank and take the seat off. Any help would greatly be appreciated.
XTags: None
-
tconroy
Take your helmet holder lock off and look on the back. There is a key # back there and that is what the locksmith will need to make you a new one.It's about 15 bucks.Dont forget to take it with you so you can make sure the new key works!
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35622
- Torrance, CA
Locksmith can make a key without the number. They scuff the surface of the key, insert, turn, remove, look for evidence of contact with the tumblers, file the area with contact, repeat until you have a new key.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
xmishx
Are you referring to the seat lock? Mine is locked and I don't see a way of taking it off.
It does look like the ignition is pretty easy to get at. From the way it looks, I've got 2 allen screws underneath and then the wire harness that goes into the headlight housing. I assume there is a plug at the end. If I take that in to a locksmith, should I be able to get a key made?
Any easy way of removing a locked gas cap of the same key?
I still cannot believe I cannot find this key!!!
Thanks
Comment
-
Pharkmeh
lmfao - keys - wooot 'kn keys....
I bought my bike the dude had a holden commodore carkey in it....
it worx great - he said i might want to secure it cause he has lost 3 in 4 mths....
so I have a snazy lil braided cord which I clip to one of the cables running either side of the center housing.... just as well to cause when ever i hit the old girl hard and and slam through the gears..... sure enough it pops out.... still runs of course... just wait till Im running a lil calmer and place it back in lmao.....
ignition key - try any long slender cage key... mebe mine is a lil buggered but it worx.....
Petrol cap key that same key inserts far enough (5mils or so into the petrol cap key and thats enough to unlock it ffs....
Seat lock dont have one i just use any flat tip screw driver or even the afor mentioned cage key to lever the sliding bolt mechanism back far enough for the seat to pop open.....
KEYS are soo over rated .....:-D
at least on my ole gurl l0o0l
cheers
Phark
ps - I am not really in the techy thread - only my wishful thinking alter ego is....:shock:
Comment
-
Forum SageCharter Member
Past Site Supporter- May 2002
- 3869
- The Gulf Coast of south Florida in the winter and northern Nevada in the summer
Key
I think blank keys are still available for most GS bikes...at least they are for mine. I was lucky...I got both from the original owner!!:-D1980 GS1100E....Number 15!
Comment
-
gs54
Keys
I was on ebay and they had keys, maybe 50 or so for suzuki cause I need a new one but you need to know the # of your old key which I didnt have, I will take my helmet lock off to see the #. Thanks for the info.
Comment
-
Clone
AAAAAAAAAARRRRRRRRRRRRRRGGGGGGGGG!
Waht is taht lnagugae Pahrk is seapikng?](*,)
I work with two Aussies and after a year still have trouble with Aussie speak!!:grin:
Comment
-
xmishx
Resolution
So I saw no way of taking off the seat lock while the seat was locked in it. My next option was just to remove the ignitiion, which takes removing the headlight bucket and unscrewing 2 allen screws to the ignition. The wireharness unclips from inside the bucket and it is done.
The locksmith I went to was an old codger who has a shop in an old beat up truck. I stopped by earlier and he said he could make me a key for $20 if I brought in the ignition. It turns out that the numbers on the ignition didn't help him much as the 2 attempts he tried failed. He ended up using a blank, and from what I could tell, used the impressions the tumblers left, and started to hand file. As I sat quietly in his little truck, I saw key blanks from Lambrettas, Fiats, odd shaped Volvo keys and keys from an Opel, which had the biggest circle in the middle I had ever seen.
What I loved about being there was that this guy is from the old school. He knew the ins and outs of his trade. He did things the traditional way and utilized his tools that were probably as old as I was.
Anyway, to get on with it, he hand filed my key which works perfectly. He used up a couple of blanks and I tipped him properly. I'll be heading back there to get another spare for the bike and one for my old Volvo trunk lock, which no longer uses a common blank. He had them though!
Comment
-
The cage key helped get him out:-) Couple days m8.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
Pharkmeh
Originally posted by chef1366The cage key helped get him out:-) Couple days m8.
Comment
-
Sorry Pharkmeh, couldn't resist. One of my buddies is an Aussie. He's the tennis pro at the country club I work at. Great guy!1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
Pharkmeh
Originally posted by chef1366Sorry Pharkmeh, couldn't resist. One of my buddies is an Aussie. He's the tennis pro at the country club I work at. Great guy!
Love means never having to say your SORRY m8.....:razz:
Comment
Comment