If you push the button, it goes up against the little copper bump on the plate, but it doesn't look like it touches anything else or completes any circuit. So, how does it work??
Announcement
Collapse
No announcement yet.
Starter button...how does it work?
Collapse
X
-
Forum SageCharter Member
Past Site Supporter- May 2002
- 3869
- The Gulf Coast of south Florida in the winter and northern Nevada in the summer
Starter button...how does it work?
After a great deal of help from Philip, I'm closing in on my electrical problem. I took apart my starter button but can't for the life of me see how it works. The little plate has an orange/white wire and a yellow/green wire attached to it.
If you push the button, it goes up against the little copper bump on the plate, but it doesn't look like it touches anything else or completes any circuit. So, how does it work??1980 GS1100E....Number 15!Tags: None
-
Forum LongTimerCharter Member
GSResource Superstar
Past Site Supporter- May 2002
- 44506
- Brooksville Fl.
The starter button is a momentary, normally off switch. The leads to it are orange/yellow 12v+ input, yellow/green 12v positive output. The switch is the positive side of the circuit only. The electrical contacts are in the underside of the spring loaded button. When the button is depressed, the circuit is completed. When 12v+ is outputted on the yellow green wire, it activates an electromagnet in the solenoid which closes the high amperage capability contacts that then supply power to the starter motor. The starter motor is always grounded as is the solenoid, hence no ground wire on the starter button.
Earl
Originally posted by chuckycheeseAfter a great deal of help from Philip, I'm closing in on my electrical problem. I took apart my starter button but can't for the life of me see how it works. The little plate has an orange/white wire and a yellow/green wire attached to it.
If you push the button, it goes up against the little copper bump on the plate, but it doesn't look like it touches anything else or completes any circuit. So, how does it work??Komorebi-The light filtering through the trees.
I would rather sit on a pumpkin and have it all to myself than be crowded on a velvet cushion. H.D.T.
-
Forum SageCharter Member
Past Site Supporter- May 2002
- 3869
- The Gulf Coast of south Florida in the winter and northern Nevada in the summer
Thanks
Thanks, Earl, for such a detailed explanation.:-D It looks so simple and I just couldn't figure out how that copper button touching up against it could complete the circuit. In any case, I cleaned it up really well and...it works!\\/1980 GS1100E....Number 15!
Comment
-
Forum LongTimerCharter Member
GSResource Superstar
Past Site Supporter- May 2002
- 44506
- Brooksville Fl.
Stuff working is always good. :-)
E.
Originally posted by chuckycheeseThanks, Earl, for such a detailed explanation.:-D It looks so simple and I just couldn't figure out how that copper button touching up against it could complete the circuit. In any case, I cleaned it up really well and...it works!\\/Komorebi-The light filtering through the trees.
I would rather sit on a pumpkin and have it all to myself than be crowded on a velvet cushion. H.D.T.
Comment
Comment