Announcement

Collapse
No announcement yet.

Starter don't work,.....bike runs.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Starter don't work,.....bike runs.

    On a 1982 850GL, 12 volts to starter. but starter doesn't turn. Is the starter chasis "ground" ? (only 1 wire going to starter)

    #2
    Can you get the starter to move by jumping the solenoid?
    1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
    1985 GS1150ES stock with 85 Red E bodywork.

    Comment


      #3
      also check here
      http://www.thegsresources.com/_forum...ad.php?t=96496

      Comment


        #4
        Had the same problem. Ran a ground directly from the screw where the solenoid is attached to the frame to the battery ground pole. Fixed it right away.

        Comment

        Working...
        X