SH238-12 regulator

[chuckycheese]

I bought a SH238-12 on Ebay and I'm pretty sure that Philip (Boondocks) would approve (It's from a 1981 Goldwing). I am very hopeful that my buddy, Philip, will address this wiring issue but I'm 'throwing it out' so everone can benefit from his considerable expertise ( as well as others that might want to contribute). The one I have is doing well..so, I'm going to leave it on for for now but, I'm going to put this new one away for the future, because it looks like 'brand new'.

Here's what I think is right:
2 red....both to positive red wire on the harness???? (Just, exactly how?)
2 green....grounded anywhere on the frame???????? (Both?)
3 yellow....to the stator.. (I think that one's a certainty)
1 black....this one seems to draw the most interest....Please address it!!

I'm looking forward to getting this solved and, hopefully, it will help others in the future!! And....as always, I thank you, my special friends!!:-D :-D

[Boondocks]

See my explanation at Shindengen SH541-12. Most people connect the black wire to the tail light wire.

Also see Caution Wiring Honda R/Rs with "Extra" Wires.

[Arkaloid]

See also:

http://www.thegsresources.com/_forum/showthread.php?t=97584

[chuckycheese]

Thanks

Thanks to both of you! Those 3 references all seem very good. For some reason, when I saw Philip's second reference in the archives, it wouldn't come up. However, this time around, I was able to see it.