Problem with starter?

[TLR Runner]

Having a problem with my 79 1000L. When I turn the key to the on position and hit the start button, nothing happens. But when I turn it one more position to the right, it will turn over but not start. I think I traced the problem to a bad kill switch. But now there is another problem.

When I engage the starter, there is a ticking sound while the starter is running. Sounds like it is coming from the left side of the bike beside the fuses. The starter will run, but it ticks the entire time in between. What could this be...maybe a solenoid?? Any suggestions?

 

[tfb]

The ticking sound will be coming from your starter solenoid. Sounds like there could be something wrong with it, although with the engine turning over, you wouldn't think so. Perhaps some of the contacts in the rear of your ignition switch are corroded or faulty?

 

[argonsagas]

I am not certain on this, as the switches may be different from the GS1100's, but it sounds like a faulty ignition switch, but is more likely to be incorrect wiring connections.

The first detent on your ignition switch is to turn on the ignition etc. The second detent should engage only the parking(tail) light.

It appears your circuit wiring is not up to par.

 

[scotto58]

Do you usually have the key all the way to the left?( Handlebars locked.) If so, the first postion to the right is "OFF" then "ON" then "PARK"(handlebars locked/taillight on).
As to the ticking-sounds like the solenoid to me.

Scott