Announcement

Collapse
No announcement yet.

What's wrong with this picture?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    What's wrong with this picture?

    This is the rear caliper for my GS750. Shouldn't there be wire clips that hold the pads onto the caliper body? Or am I stuck in the world of automotive brake replacement?


    #2
    there is on my 1100
    check BikeBandit microfishies

    Comment


      #3
      There are 2 different wires on my 78 GS1000. One holds the pads down while the other (where the 2 wires are twisted together on yours) runs from one pin to the other through the holes that are there.

      Comment


        #4
        This is from a slightly different model, but it had a clearer picture of the part. What you need is #9.

        Comment

        Working...
        X