.png "Powered by vBulletin")
I'm trying to hunt down some pilot fuel screws for a '79 gs 550 with the VM22SS carbs on it. I checked out http://www.mikesxs.net/ and saw that they have several mixture screws available, but they're for the CV carbs. I'm wondering if by some miracle they might work in my VM carburetors. I also contacted http://www.motorcyclecarbs.com/ but they want me to buy a whole rebuild kit at $27 each, and I need four. I'm hoping to spend less than $100 on four screws, particularly since I already have rebuild kits. As always, help is most appreciated!
-
-
As you have found out NOT all of the kits have the fuel screws. So your screwed will have to buy another set. You could call www.sudco.com
the needles will cost $20@ IF YOU can find them -
Good luck! It took me forever to find mikesxs.net for the CV screws. Maybe they fit the VMs, I dunno; but I do know almost nobody is selling mixture screws separately.Comment
-
I've got 3 sets of screws/springs/washer/o-ring for VM carbs. Check the for-sale parts section.Comment
-
Thanks for the tips guys, luckily I was clued in to a local motorcycle salvage yard I didn't know about that had a bunch of carbs lying around for parts. I was able to find all 4 screws I need, plus a few extra. By the way, DmitriT, I checked the for-sale parts section, but it said there were no posts. Don't know why that is, but you might want to check to see if your stuff is still up. Thanks again!Comment
Comment