Help:05-06 Busa Swing Arm on 82 GS1100E

[treed]

Will a swing arm from an 05-06 busa fit my 82:gs1100E with out using the busa shock.

Thanks in Advance,
Tee

[KGB]

You'd need t omeasure the inside width of the mount
and the edge to edge of the busa swingarm.
trying to fit a bigger tire in there?

[rphillips]

Anything is possible, but maybe not practical. Where would you mount the shocks????

[treed]

Yes, I am trying to put on and busa rear wheel and swingarm. I intend to modify the arm and add dual shock perchs.

Thanks
Tee

[80GS1000]

What are you looking to gain out of this mod?

[Busafied]

What are you looking to gain out of this mod?

Wider rear tire I am assuming-

2 things come to mind-

1) Sprocket Alignment
2) Diameter of Swingarm axles {You'll need to fab some busings for the difference}

[Dink]

You are aware that you can fit a 17" X 5.5" wheel and a 180 section tyre into the stock 82 swingarm, you do need to convert to 530 chain, refer to Katman's ICBM thread in the performance mods forum.

Dink

[Busafied]

You are aware that you can fit a 17" X 5.5" wheel and a 180 section tyre into the stock 82 swingarm, you do need to convert to 530 chain, refer to Katman's ICBM thread in the performance mods forum.

Dink

Thanks for the Info Dink, now I know the 82 will get one too =D>