I have one that has these,Chain driven, Both are 18'' F/R, both are disc brake. Don't know the width's off hand. I believe they are stamped/made buy Tukasago don't remember for sure. Just curious. All the GS' I have seen around or owned had steel rims if not the mags.
Announcement
Collapse
No announcement yet.
Rims?
Collapse
X
-
paco13
Rims?
Was wondering, Did any 1978 GS750's come stock with spoked aluminum wheels?
I have one that has these,Chain driven, Both are 18'' F/R, both are disc brake. Don't know the width's off hand. I believe they are stamped/made buy Tukasago don't remember for sure. Just curious. All the GS' I have seen around or owned had steel rims if not the mags.Tags: None
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35622
- Torrance, CA
I think yes.
Check this link for more info.
Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
-
edbot
I'm not certain, but I don't think those are stock wheels for a 78 750. I'm not aware of any with aluminum rims, and I'm pretty sure that they all had a 19 inch front wheel and an 18 inch rear with steel rims.
Comment
-
Only the 1000s had the aluminum rims, in 18" rear and 19" front
So those are some non standard, and nice , rims1978 GS 1000 (since new)
1979 GS 1000 (The Fridge, superbike replica project)
1978 GS 1000 (parts)
1981 GS 850 (anyone want a project?)
1981 GPZ 550 (backroad screamer)
1970 450 Mk IIID (THUMP!)
2007 DRz 400S
1999 ATK 490ES
1994 DR 350SES
Comment
-
paco13
I didn't think they were stock but wasn't sure.
I checked the above Link(Thank You) and there was no mention of these rims on the site.
The bike was set up to race somewhere in its life. Shame I aquired it with a siezed engine. PO left it to the weather with the spark plugs out, Fool!!
The front wheel/Fork only has one disc, but the hub is drilled and tapped to accept 2.
Am thinking about using them on my '80 GS1100ET, kinda like the look of them. I wish the fuel tank would slip on my frame but NO.
The bike appears to have a slitely different rear master cyl. as well, plus it has a Heat sinked alum. barrel plumbed into the line at the caliper end for cooling. probly swap that over to, along with the mini tach. and speedo.
Well thanks for the responses.
Paul
Comment
Comment