Announcement
Collapse
No announcement yet.
no juice
Collapse
X
-
my425E1979
no juice
hi, havent been here in awhile and thats a good thing... but i recently tried to start my bike after it had been sitting for about 3 weeks and i'm getting no lights when i turn the key.. i had the battery charged and its reading 13v, so thats not the problem. the cover i have for the bike isnt 100% water-proof so im thinking some rain got in somewhere and shorted something.. i just have no idea where or how to start troubleshooting this.. any suggestions?? [-o<Tags: None
-
nabrams
Use a multimeter to verify where in the circuits in question the voltage is present. Then see where voltage downstream of that pioint is not present. Then you keep on narrowing it down further. Start at the main fuse. If you've got no voltage there, then nothing will work. You may simply have a loose and/or dirty connection.
Of course, this all asumes that you have a wiring diagram or are experienced enough to figure out the circuits yourself.
The above is tedious but will guarantee you find the failure point.
-
my425E1979
-
Turn your fuses or try new ones.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
Comment