1983 GS550 head torque

[Jackw]

I am checking my valve clearances on my bike and figure I might as well re-torque the heads at the same time. Anyone know what the specs are for this? thanks

[skreemer]

if you can wait till I get home(6 or 7central time) I'll pull the torque specs out of the haynes manual...

[gs425e]

hi im just intresred as you have the same bike as me do you know when how far the air screws should be (turns out) cheers andy

[chuckycheese]

Leaks?

Unless you've got oil leaks or other related issues, I'd be really reluctant to touch those bolts!:?

[oldschoolorange]

16-20 ft lbs according to the factory manual

[skreemer]

that seems about right I think mine are set at 18lbft...

the air screws I'll have to look up I have a stage three jet kit in mine and it's only one and a quarter turn out... I could guess the stock number but I'd rather have it correct.

[Jackw]

Leaks?

I don't have any oil lieaks or other issues with the head at all. I'm just checking the valve clearances and my manual says to re-torque the heads at the same time. Maybe I should leave it be then. Thanks for your input