Announcement
Collapse
No announcement yet.
lowering a bike
Collapse
X
-
Anonymous
lowering a bike
maybe some of you have read the earlier post i posted about the yamaha cx 500, i know it might be a honda, but if i get this im definitley going to lower it. what is involved in that? im thinkin shorter front forks and an adjustment of the rear suspension?Tags: None
-
Anonymous
Re: lowering a bike
Originally posted by ice109maybe some of you have read the earlier post i posted about the yamaha cx 500, i know it might be a honda, but if i get this im definitley going to lower it. what is involved in that? im thinkin shorter front forks and an adjustment of the rear suspension?
I just did a search and the cx500 seems to definitely be a honda.
-
Anonymous
-
Anonymous
Originally posted by ice109nah but ill get one
Anzeige als E-Mail verschicken. Literaturpaket zur Yamaha SR 500/ XT 500 und CX 500 -
Comment
-
Anonymous
Here's esrch link but i dont know how to read the languages http://search.yahoo.com/search?p=yamaha+cx+500
Comment
-
Anonymous
You should be able to keep your forks if the 500 is like any bike I've seen. You can just loosen the clamps on the tubes and slide the bike down until the forks hit the handle bars. If you need to lower it more you'll have to get different handlebars. Possibly handlebars that clamp onto the tubes. From what I've heard about doing this you may crash when you go into your first turn because the bike can become very unstable if you don't lower the rear as well.
Steve
Comment
-
Originally posted by slopokeOriginally posted by ice109nah but ill get one
Anzeige als E-Mail verschicken. Literaturpaket zur Yamaha SR 500/ XT 500 und CX 500 -
The only CX500 I've ever heard of is the v-twin, water cooled Honda. Can't remember if it was a shaft or chain drive. Did they not punch it out to 650cc and stick a turbo on it, or are my facts not straightKevin
E-Bay: gsmcyclenut
"Communism doesn't work because people like to own stuff." Frank Zappa
1978 GS750(x2 "projects"), 1983 GS1100ED (slowly becoming a parts bike), 1982 GS1100EZ,
Now joined the 21st century, 2013 Yamaha XTZ1200 Super Tenere.
Comment
-
Anonymous
cx500
The cx500 is a Honda, at least I belive it's exclusively a Honda stateside. I've never heard of the yamaha version, but who knows.
The Honda cx500 is shaft drive, and it closely mirrors the 650. There is also a turbo version which is, I believe, rather rare.
My first bike was '78 Honda cx500, and though I didn't ride it much (charging problem that I didn't think was worth fixing. I wish I had though ), I loved that bike. For a bike of its age and condition, it was fast and handled very well. The front wheel would stand right up too... :twisted: I'd love to get another one of those bikes to tinker with... It wouldn't stand up to my 1100E, but it would be fun anyway.
Comment
-
Bill + Karen
The CX is a shaft drive I still have mine in the garage. Good running bike has some of the stater, reg. issuses like the GS. They did turbo them, both the 500 and the 650, supposed to be real arm stretchers when the boost comes on. The 650 is hard to find but the 500 is more common. I might have to ride mine today because the G is still in pieces and I'm suffering an extreme case of PMS. Kinda hate to ride it since buying the G, because by comparison its a slug. Safe Riding, Bill
Comment
Comment