Announcement

Collapse
No announcement yet.

1100 Exhaust valves..?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    1100 Exhaust valves..?

    Pulled my 1100 (16 valve) down yesterday to give her a bit of a freshen up and (Oh no) the exhaust valves are in a terrible state with one of them looking like a mouse had started to nibble on the face..! They have obviously been refaced at some stage and are obviously past their use by date.
    Bit hard to come by here in NZ so are there any outlets in USA (international shipping) that I can get a set from? OEM or aftermarket?

    #2
    A couple stateside sites are mrcycles.com, bikebandit.com, and (I think) alphasports.com.

    Brad bt

    Comment


      #3
      Get a hold of Jim Ashcroft over there. He is our distributor in NZ. He can get either oem or stainless valves from us.

      Jay
      Speed Merchant
      http://www.gszone.biz

      Comment


        #4
        Check to be sure, but I'm pretty sure I remember, the oem valves for your bike are stainless steel.
        1983 GS1100E, 1983 CB1100F, 1991 GSX1100G, 1996 Kaw. ZL600 Eliminator, 1999 Bandit 1200S, 2005 Bandit 1200S, 2000 Kaw. ZRX 1100

        Comment

        Working...
        X