TIA
Announcement
Collapse
No announcement yet.
%#$#$#!!! Help!!
Collapse
X
-
Beef
%#$#$#!!! Help!!
Well I got around to rebuilding my carbs this week on my 80 GS750L and low and behold 3 outta 4 carbs had JB weld on the float posts.... so I am not goin to rebuild broke carbs and jet them. I need to know what has interchanageable carbs with my bike.
TIATags: None
-
mortation
Originally posted by Beef View PostWell I got around to rebuilding my carbs this week on my 80 GS750L and low and behold 3 outta 4 carbs had JB weld on the float posts.... so I am not goin to rebuild broke carbs and jet them. I need to know what has interchanageable carbs with my bike.
TIA
-
Beef
-
go though here and look fo rthe same size carbs. bs32???78 GS1000 Yosh replica racer project
82 Kat 1000 Project
05 CRF450x
10 990 ADV-R The big dirt bike
P.S I don't check PM to often, email me if you need me.
Comment
-
Yes. BS32SS Mikuni carbs. Any rack of this kind will work. Just switch out your jets and jet needle.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
SqDancerLynn1
-
arveejay
Hang on, Someone is about to tell you JB Weld won't disolve in gas and to go ahead and glue them again. Your on the right track, check Ebay daily, they show up all the time.
Comment
-
arveejay
These will need a bit of TLC but should be what you need.
Comment
-
SqDancerLynn1
You can also have them fixed for probably what another ebay set will cost
www.motorcyclecarbs.com
Comment
Comment