Announcement

Collapse
No announcement yet.

Adjustment info

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Adjustment info

    OK, so I ordered the manual for my bike, a new set of rubbers for the spark plug caps and talked to the local shop owner.

    Still got a funny bogging ad 3500 to 4500 RPMs Can't figure out what's wrong with it. So I tore apart my carbs yesterday. First time I've had to do this on this bike.

    OK, first of all, the left carb (86 550s have 2 two-barrel) was leaking out of the boot going to the airbox. the left one seemed fine.

    When I took it apart, the first thing I noticed was that the RIGHT carb had the float needle in upside down .

    So, basically, someone didn't put the carbs together right, and there could be anything misadjusted on them.

    What I'm looking for...

    1)float heights
    2)jet size (2 main & 2 pilot in 1 bowel)
    3)slide needle height
    4) anything else pertinent

    #2
    Originally posted by Bud View Post
    OK, so I ordered the manual for my bike, a new set of rubbers for the spark plug caps and talked to the local shop owner.

    Still got a funny bogging ad 3500 to 4500 RPMs Can't figure out what's wrong with it. So I tore apart my carbs yesterday. First time I've had to do this on this bike.

    OK, first of all, the left carb (86 550s have 2 two-barrel) was leaking out of the boot going to the airbox. the left one seemed fine.

    When I took it apart, the first thing I noticed was that the RIGHT carb had the float needle in upside down .

    So, basically, someone didn't put the carbs together right, and there could be anything misadjusted on them.

    What I'm looking for...

    1)float heights
    2)jet size (2 main & 2 pilot in 1 bowel)
    3)slide needle height
    4) anything else pertinent
    Is that info. not in the sticky at the top of the page? I didn't look so it may not be.

    Comment


      #3
      It's not in there, I will repost in that thread as well, sometimes my eyes somehow miss the stickies.. donno why.

      My 86 seems to be ALOT different than most bikes in a bunch of small ways. It's just wierd.

      Comment


        #4
        ok, I found a bit of info on alpha-spots.com

        main jet for 4 and (1)?
        .JET, MAIN (90) 2 LH,RH
        .JET, MAIN (92.5) 2 OPT,LH,RH

        jet size for 3 and (2)
        .JET, MAIN (97.5) 2 ML,MR
        .JET, MAIN (102.5) 2 OPT,ML,MR

        Needles
        .NEEDLE, JET (5C64) 4

        needle jet
        .JET, NEEDLE (P-3) 4
        Pilot Jet
        .JET, PILOT (37.5) 4


        Once I get the other Info, I'll post it in the sticky

        Comment

        Working...
        X