need torque spec ASAP!!! GS 1150

[mark 1150]

can someone give me the torque spec for the nut on the left side of crank that holds on the charging rotor, i've looked everywhere i could think of and cannot find it. HELP ASAP, i'm in michigan and its gonna be 60 this wekend....WANNA RIDE!! This is for a gs 1150
thanks,
mark

[Steve]

This might be of some help to you. Looked in my Clymer book for 850-1100 and found nothing.

Looked in my 650 book and found 65-72 ft-lb. \\/

Enjoy your ride, we are going to be WET all weekend.


.

[mark 1150]

thanks, steve, still searching

[ScottMc1100L]

In my Suzuki GS 1150 service manual, in the back there's a Torque Table. If the nut to which you are referring is the "Generator Rotor Nut" the specs are:

160-170 N-m / 16.0-17.0 kg-m / 115.5-123.0 lb.-ft

Hope that helps8-)

[drhermanstein]

Looked in my Haynes book and found "alternator rotor nut" 115.7- 123.0 lbf ft

[mark 1150]

thanks fellas!!!
mark

[Steve]

I guess 1150s need tighter nuts than 650s.


.

[koolaid_kid]

I guess 1150s need tighter nuts than 650s.

So does the rider.\\/

[ScottMc1100L]

thanks fellas!!!
mark

Your welcome! Now get out there and ride ! \\/

So does the rider.\\/