Announcement

Collapse
No announcement yet.

continuing ignition saga

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Well it seems I found the problem. After talking to a mechanic I found thru a friend. Originally worked on Suzi's 25 years ago when there was a shop in town. After having me remove the airbox to check for another problem, I discovered that 1/3/4 carb boots were getting soaked in gas. Seems that the shop that the carb rebuild set the floats wrong. So, I'm gonna have him go through them to see what they actually did. While he's at it, I'll have him adjust the valves to insure no further problems. Thanks to all for the troubleshooting tips. You folks are the best!!

    Comment


      #17
      Have you tried swapping the ground wires between the ignition coils?

      Gavin

      Comment

      Working...
      X