.png "Powered by vBulletin")
Smaller back sprockets (40tooth) for 630 chains come of 1980 GSX1100/750L's.
1980 GS750 front sprockets havent the "dampner" attached to them.
Cast wheels are not tubeless unless they have saying otherwise on them.
Terry (sherriffbuck@yahoo.com) sells oil cooling fittings for the 8 valve models.
GS1000ST and 1000 Katanas didnt have smooth-bores on them, they where called oval-bores.
New Zealand had the real Katanas with the big hole exhausts.
17inch spoke wheels and 530 chains dont look right on "classic" bikes.
Air boxes are always better than pods on carbies.
Spacers are always better in front forks than 10psi of air.
Leaking carbs are worn or full of crap, either way the have to be pulled apart.
And all air cooled motors fit into other air cooled frames. (besides shafties)
If your ENGINE (motors are on washing machines) leaks oil you will have to fix it and that costs money.
There that will stop about 10 posts a day. Tommorow ill get out of the right side of bed. LOL
1980 GS750 front sprockets havent the "dampner" attached to them.
Cast wheels are not tubeless unless they have saying otherwise on them.
Terry (sherriffbuck@yahoo.com) sells oil cooling fittings for the 8 valve models.
GS1000ST and 1000 Katanas didnt have smooth-bores on them, they where called oval-bores.
New Zealand had the real Katanas with the big hole exhausts.
17inch spoke wheels and 530 chains dont look right on "classic" bikes.
Air boxes are always better than pods on carbies.
Spacers are always better in front forks than 10psi of air.
Leaking carbs are worn or full of crap, either way the have to be pulled apart.
And all air cooled motors fit into other air cooled frames. (besides shafties)
If your ENGINE (motors are on washing machines) leaks oil you will have to fix it and that costs money.
There that will stop about 10 posts a day. Tommorow ill get out of the right side of bed. LOL
Comment