Announcement

Collapse
No announcement yet.

Speedo Needle Jumping

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Speedo Needle Jumping

    Hello All,

    First Post for me. I have an '82 GS850, which is just about perfect, except for one thing.

    At around 55 MPH and again at 65 MPH, the speedo needle starts jumping back and forth.

    Any suggestions on how to fix this issue?

    More annoying that anything.

    Thanks.

    #2
    Welcome to the fourm. You might try lubing the cable and/or speedo mechanism.

    Comment


      #3
      Yep. I had that. I undid the cable from the speedo and sprayed in some lube, then did the cable. Problem fixed. Later I had to do the same to the tach.

      Comment


        #4
        Welcome to the GSR. Good advice offered already, I had to Replace the Speedo Cable on my 850 Last Year and they do need to be Lubed once in a While. Where are You in Tennessee?
        sigpic2002 KLR650 Ugly but fun!
        2001 KLR650 too pretty to get dirty

        Life is a balancing act, enjoy every day, "later" will come sooner than you think. Denying yourself joy now betting you will have health and money to enjoy life later is a bad bet.

        Where I've been Riding


        Comment


          #5
          Sounds easy enough

          Thanks for the advice all.

          I am in Lexington, TN for the last post

          Comment


            #6
            can i ask why it matters? the speedo is pretty inaccurate anyways....

            Comment


              #7
              Use chain wax.
              1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
              1985 GS1150ES stock with 85 Red E bodywork.

              Comment

              Working...
              X