Announcement

Collapse
No announcement yet.

Leaky Carb out Drain Tube

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Leaky Carb out Drain Tube

    Hi Guys,

    I have a 1978 GS 750 with 33k on it. I recently pulled it out of storage outside from a northwest winter. I started it up which started rough but the drain tubes on the carbs are leaking gas periodically, not out of any specific one. The weird thing is that the bike runs very well for supposedly being flooded. It will idle well for a while then change rpms stay there for a while then eventualy quit running. Does anybody have any ideas? and could it only be in the carbs? Thanks for the help (summer is almost here help)8-[

    #2
    Take off your float bowls and clean the float needle and seat. You realy should take them off and clean them. These carbs don't sit very well and need a good cleaning if they do.
    1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
    1985 GS1150ES stock with 85 Red E bodywork.

    Comment


      #3
      Ditto what chef1366 said.

      I never saw anybody eating in the bathroom!

      Comment


        #4
        Originally posted by chef1366 View Post
        Take off your float bowls and clean the float needle and seat. You realy should take them off and clean them. These carbs don't sit very well and need a good cleaning if they do.
        http://www.thegsresources.com/gs_carbrebuild.htm

        Agreed, but use this clean-up guide - http://www.thegsresources.com/files/vm_carb_rebuild.pdf - it's specific to the VM carbs that are on the '78 750.

        Comment


          #5
          Originally posted by fgh View Post
          Ditto what chef1366 said.

          I never saw anybody eating in the bathroom!
          You'd be suprised!
          1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
          1985 GS1150ES stock with 85 Red E bodywork.

          Comment

          Working...
          X