Announcement
Collapse
No announcement yet.
Starter interlock switch???
Collapse
X
-
scottyTags: None
-
There are several switches involved in starting our bikes:
1) The ignition switch sends power from the battery to
2) the kill switch on the right side hand control, which then sends power to
3) the starter switch. Power then goes to
4) the clutch switch (probably the one you are asking about), which sends it on to
5) the starter solenoid, which then allows LOTS of power from the battery directly to the starter.
If you are asking about the clutch switch (#4), it is on the bottom of the clutch lever mount, much like the front brake switch is on the right side. If you trust yourself more than the government does, you can bypass that switch by tracing the wires into the headlight bucket and re-doing the connections in there. You will now be able to start the bike without pulling the clutch.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
-
scotty
-
Forum LongTimerCharter Member
GSResource Superstar
Past Site Supporter- May 2002
- 19276
- Toronto, Canada
Scotty, to ensure all points are covered, I recommend you switch to this interlocking device for a start:
Bertrand Russell: 'Men are born ignorant, not stupid. They are made stupid by education.'
Comment
-
relic-rider
Starter interlock=clutch lever start switch. This means you have to pull in the clutch lever to operate the starter. Some guys disconnect it, but I like it to function properly. The switch on the clutch lever is exactly like the switch to activate the brake light on your front brake lever. The copper contact inside gets worn or dirty or out of adjustment over time. Most guys just disconnect it in the headlight bucket and reconnect the wires(green/white stripe) in the harness.
It may be a hassle to some, but it is nice for the time you forget to have the bike in neutral when starting it. Also, it is nice that if you stall out in traffic, all you need to do to restart is pull in the clutch, without going to neutral. Funny thing is that according to some wiring diagrams in my books, only the US and Canada had this feature.
Comment
-
scotty
I have a mechanic from ireland that say this is other than the clutch switch or sidestand switch. He says it is located near the battery on the left side. I see nothing but both other switches are on the schematic in adition to this interlock thing. I will continue to search before i mount a starter button and a toggle switch on the left side cover . I like the old style without all the extra safety switches. They were installed to protect greenhorns and confuse old school riders.
Comment
-
scotty
-
The only starter-related switch near the battery would be the solenoid,
unless there has been an alarm system with an interlock installed.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
relic-rider
Originally posted by Steve View PostThe only starter-related switch near the battery would be the solenoid,
unless there has been an alarm system with an interlock installed.
.
Comment
-
Forum LongTimerCharter Member
GSResource Superstar
Past Site Supporter- May 2002
- 19276
- Toronto, Canada
Originally posted by scotty View PostI think that knit stuff is typical of a canadian interlock Ron. :-D
Knit-picking gives us something to do during the long, cold, Canadian winters, Scotty.
.
(other than making puns):-DBertrand Russell: 'Men are born ignorant, not stupid. They are made stupid by education.'
Comment
Comment