.png "Powered by vBulletin")
1982 gs850, works fine except after a drive won't turn over fast enough to start. let it cool down10 mins and its fine. new battery last fall, any ideas?[-o<
-
-
Dead spot in starter. Try pushing the starter rapidly a couple times even when hot. That will turn it past dead spot. Consider replacing brushes or starter. Your call. Or just wait til it cools off. -
I'd check connections between the battery and starter, heat will make a bad wire or connection worse or fail all together.Comment
-
Classic symptom of dirty starter insides. Been discussed a million times - do a search.Comment
-
1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
Even though you say it's relatively new, how was it stored over the winter?Originally posted by sterlingmarlin30 View Post
I would not rule out the possibility of a weak battery.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
Comment