Announcement

Collapse
No announcement yet.

Picked up an 83 750ES - I'm Forked

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Like I said before it is a 550, an E model. I'd bet the fork seals are junk, that is probably why the fluid is low. You could just use some PVC pipe on top of the springs to add some pre-load, 1 or 2 inches would be plenty, just make sure the cuts are straight and square.
    Dee Durant '83 750es (Overly molested...) '88 gl1500 (Yep, a wing...)

    Comment


      #17
      There is a current ebay listing for a gs 550 e
      I thas all kinds of useful bits
      whole bike is being parted out and it has low miles according to the seller

      that is a gs 550 L 550 e Hybrid

      Comment


        #18
        The ES models have a half fairing, which though it might've been missing, it doesn't have the mounts for it. So, you're correct, E model.

        Comment

        Working...
        X