Billy
Announcement
Collapse
No announcement yet.
How do you grease wheel bearings?
Collapse
X
-
Billyboy
How do you grease wheel bearings?
I seemed to have developed a squeak up front and think it might be the wheel bearings. Low speed, intermittent. Is it possible to grease them?They look sealed.
BillyTags: None
-
Roger P.
If it is bearings, replace them. If they have reached the point of squeaking, they are already toast. I'd suspect something else though, like the speedo drive, or worn pads. Bearings that bad would be causing some interesting handling issues, I think.
-
Canada Dan
I went for a ride last night and noticed the same thing after about 150km's. Stopped in Falher for fuel and noticed a soft chirping noise from the front wheel as I slowed down.
I checked the front bearings for temperature and found both sides cool to the touch, checked again in Valleyview and after I got home - still nice and cool.
It had kind of slipped my mind, but I'll bet Roger's got it - I'm going to lube up the speedo and see if that takes care of it.
Comment
-
koolaid_kid
This could also be caused by worn brake pads. Pull them out and take a look, it is very easy and quick to do.
Comment
-
8trackmind
Originally posted by Roger P. View PostIf it is bearings, replace them. If they have reached the point of squeaking, they are already toast. I'd suspect something else though, like the speedo drive, or worn pads. Bearings that bad would be causing some interesting handling issues, I think.
Comment
-
Billyboy
Thanks guys. I just had 'er propped up and spun the wheel. Nothing.
I did check the head bearings for movement and found some. Now that is fixed.
Now I'm thinking it is the brakes.
Comment
-
8trackmind
Originally posted by Billyboy View PostThanks guys. I just had 'er propped up and spun the wheel. Nothing.
I did check the head bearings for movement and found some. Now that is fixed.
Now I'm thinking it is the brakes.
Btw, the bearings are sealed...You simply change 'em out if they go bad.
Comment
-
Hap Call
-
After I clean the front brakes and a couple of hundred miles my front brakes sound like a couple of field mice screwing.:-D
Just clean the pads with brake cleaner if they are still good.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
Comment