Will Euro bars clear the vetter fairing?

[fishmeok]

I'm getting my new GS850G up to speed. One of the first things after pulling the carbs and draining the tank was removing the stock bars for a set of low rise Euro style that I have. Problem is the bars don't clear the fairing, specifically the brake and clutch levers. I want to keet the Vetter w/lowers on, so here's my question:
Will a set of Bikemaster Euro bars clear the vetter fairing (they look like thay have more rise than the bar I have)? Any suggestions for lower bars with a high enough rise to work?
Thanks
Mark

[mark]

I went through this. I tried Bikemaster bars with about a 2 inch rise and they fit O.K. However with a Vetter fairing I found them not very comfortable (no wind resistance pressing against you) and frankly a little out of place.

Few people like the stock bars. I ended up with this and I think they are perfect. A little spendy but very comfortable.

http://www.jpcycles.com/productdetail.aspx?PID=ZZ50072&cs=Metric&GID=BD7ABDE1-6AC1-49BC-8D3B-341E792F91A9&store=&page=&search=

[salty_monk]

Similar rise & sweep for a lot less $$$ here.... http://www.crc2onlinecatalog.com/

[fishmeok]

Thanks- I just ordered the GP Touring bars- 4" rise and 4" trail, we'll see how they work...
Cheers
Mark