Announcement
Collapse
No announcement yet.
Air pods? for a 1981 550lx
Collapse
X
-
FIREMAN
Air pods? for a 1981 550lx
Yeah sort of wrote the question in the title, I am thinking about switching from the stock airbox setup to a single pod per carb. I read through the forum and hear about alot of guys having to rejet the carbs. Is this always necessary or just with high flow filters ie k&n. also were is a good place online to purchase these parts. thanks 8-[Tags: None
-
It's necessary to rejet.
I would not recommend from what people have said, it makes tuning a real pain and the hp/trq gain does not warrant the effort put forth.
I simple went for a drop in k&n filter and got the best of both worlds. Stock airbox, and high flowing filter.1980 Gs550e....Not stock... :)
-
I agree. To keep things from melting down, and to take full advantage of the extra air that would be available, you must rejet. As mentioned, however, the power gain from just adding the pods is minimal. The only difference you are likely to notice is noise when you open the throttle. Yeah, it's sorta like turning the lid over on the filter housing of the old 4-barrel carbs of yester-year, but I find that it gets annoying after a while.
I have pods on the 650, but I don't notice the intake noise so much because it gets drowned out by the header.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
Heh Steve. I haven't thought of the quadrojunk lid flip in quite a while. It did sound pretty badas*.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
Comment