Announcement

Collapse
No announcement yet.

630 chain replacement

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    630 chain replacement

    Hey folks,

    Where is the best place for value and price to get a replacement chain for my 1980 GS 750 L? My old chain is origional, and the "O" rings are shot - it is not really worn out, but is getting loud and needs constant outside lubercation - which really makes a mess.

    I found an "EK" chain (EK 630SRO) on the internet at BikeBandit.com w/ O-ring. Is this a good replacement chain for my GS? Any better suggestions?

    Thanks!

    Paul C.

    #2
    I did a 530 kit on my 77 gs chain & sprockets, I did notice it pulled a little better and lost about 10pds in chain weight. I think it was the same as a 1982 16 valve gs750.

    Comment


      #3
      Are you sure it is a 630 chain you need? I just went thrugh this with my 83 750E. From the size of the chain I thought I needed a 630 as it looked so much beefier than the 530 on my Yammie. I even had my buddies at the dealership check it and they also thought it was a 630. When I had it off, I read 530 on the rear sprocket. then I thought to look in the manual and it calls for a 530.

      It may be different for your bike but the concensus is that 750s would only need a 530.

      Check the sprocket for marking and if you can clean the crud off your chain it should also be stamped.

      Just thought you might want to check.

      Cheers,
      Spyug.

      Comment


        #4


        These guys have been great to me. Fast shipping. Great prices. You won't find cheaper chain prices.
        Till Brian proves me wrong.
        1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
        1985 GS1150ES stock with 85 Red E bodywork.

        Comment


          #5
          I just happened to get a new JC Whitney catalog yesterday, so I looked up what they had to offer.
          (They seem to indicate that it is a 630 chain.)

          Front sprocket:
          15-tooth, p/n CBG024982, $13.99

          Rear sprocket:
          41-tooth, p/n CBG066018, $34.99

          Chain:
          630, 96 links, p/n CBG024936. $69.99


          Just a note...I have not dealt with chain-drive bikes since April, 1979 when I got 'shafted' :shock: for the first time. I have no idea of the quality of the above parts, just letting you know that they are available.


          .
          sigpic
          mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
          hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
          #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
          #2 son: 1980 GS1000G
          Family Portrait
          Siblings and Spouses
          Mom's first ride
          Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
          (Click on my username in the upper-left corner for e-mail info.)

          Comment

          Working...
          X