Announcement

Collapse
No announcement yet.

Adjusting timming and valves?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Adjusting timming and valves?

    550e valve adjustment ?


    Thanks
    Last edited by Guest; 07-09-2007, 05:26 PM.
    Tags: None
    #2
    Anyone? Help?

    What do I need to adjust the valves on a 1980 gs 550e? Is it shimed or what? Can I adjust the timing? Where is the timing mark? I know it should be 15* BTDC. Any help would be nice.
    Thanks

    Comment

      #3
      You use shims to adjust valve clearance. The timing is not adjustable. It has electronic ignition. You can check cam chain timing with marks on the camshafts and crank trigger.
      1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
      1985 GS1150ES stock with 85 Red E bodywork.

      Comment

        #4
        suzuki 550 manual 1980 - Google Search
        http://www.google.com/search?hl=en&q=suzuki+550+manual+1980&btnG=Google+Search


        Don't forget the SEARCH feature!! - The GSResources Forums
        http://www.thegsresources.com/_forum/showthread.php?t=66555
        This forum contains old posts which may have information which may be useful. It is a closed forum in that you can not post here any longer. Please post your questions in the other technical forums.
        and God said, "Let there be air compressors!"
        __________________________________________________ ______________________
        2009 Suzuki DL650 V-Strom, 2004 HondaPotamus sigpic Git'cha O-ring Kits Here!

        Comment

        Previous template Next
        Working...
        X