great reading...but my ears didn't perk up until the last page...
things I could relate to:
thinning oil
bike running really hot
fuel in the oil
sealed air box
I've got another big trip coming up this weekend...my last one to Monument Valley was marked by a sneaking suspicion that I am driving my GK to an early (very early!!! she doesn't even have 4,000 miles yet!!!) grave. Grandpa, you're logic (enjoy the dang ride) from past posts and from your posts in the thread mentioned above helped me through the trip...I still suspect that I am doing irreparable damage to my old-school touring machine :shock:
here's the scoop:
before embarking on my last adventure a couple of months ago, I had my first major issue with my GK...fuel POURING out of the airbox and flooding the engine...of course this had to happen a couple of days before the big trip! 4-5 oil changes and a oil filter change and a couple of air filter cleanings helped her make the 1,000 mile round trip. I've kind of been avoiding her since! (got a pretty new paint job on the 850 - part of the 1100 avoidance!) but now the 850 is in pieces again (changing boots and gaskets and getting a valve adjustment done) and I'm going to be touring southern NM with my camping gear, so the 1100 is the logical choice for the trip. (sorry, this is getting to be a little too long!)
so, back on the 1100...commuting a couple of days last week and I noticed, man...this thing is burning my dang legs off! By the way...back to the fuel in the airbox/engine - I've got numerous opinions and ideas...I agree with Grandpa though...it's the petcock (possibly the carbs, but not probable) - yes, I am going to replace it, just not before this trip (after, right after!) - to avoid getting more fuel in the engine or airbox I have figured out that keeping her on the center stand, not full of gas, and never putting the petcock to anything but the "on" position will keep the fuel where its supposed to be. (this is my temporary band aid until the new petcock arrives!)
anyway, my legs are burning off - but I'm hard headed and STILL wasn't sure that it was running TOO hot...not until reading the other hot bike thread...someone mentioned it shouldn't be making the tick/ticking sound from the pipes when I shut it off...ok, it's doing that - safe to assume its running too hot? I think so.
I'll be changing the oil - I used Pennzoil 10w40 last time...will go back to the Valvoline Motorcycle 4 Stroke 10w40 this time though - unless someone thinks the 20w50 is a better choice?
I'll be changing the oil filter
I'll be putting new weather stripping around key areas of the airbox
I'll be putting a new K&N air filer in
I'll be putting new plugs in
I'll be putting new in-line fuel filters in
I'll be putting a spakin' new acrylic windshield on \\/ (hopefully! I find out this afternoon)
I'll be employing my silly band aid fix that keeps the fuel where it should be during the trip
again, sorry for the long post...!
help me out here! am I crazy for even considering this trip? keep telling me these things are bullet proof and I've got nothing to worry about...[-o<
warped aluminum? aww, c'mon...can it be THAT bad? 8-[
Comment