.png "Powered by vBulletin")
When you sync carbs are you supposed to have external adjusting screws? My 81 gs850L has no external adjustments. Please dont tell me to use the search feature because I did not see this type of question. Thanks Guys
-
-
On the throttle linkage of each carb there is a lock nut and an adjuster screw. If it is a four cylinder only #3 doesn't have one.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
-
If you look closely on the engine side of the carbs, between the intake tubes, you will see the adjusters. Kinda hard to see the one between #2 and #3 without pulling the tank, but it's there. 8-[
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
-
Between
As Steve says, don't look at the carbs....look between them.1980 GS1100E....Number 15!
Comment
Comment