Cam Install help -- rebuild Tech needed

[dardoonk]

Okay, I took everything apart on Sunday and did it again. Same result.
I got in contact with Performance Cycles in Monroe, NC for some added support. This is an indy shop who has done nothing but rebuild & race Kawi & Suzuki's for years. I explained everything to him and let him set me straight.

In a nutshell, I did everything right and he told me to make sure the two notches on the end of the camshaft point directly at on another. If they do, and I am counting 20 pins from mark to mark on the cam gears, then I am as close as I can get.

Thanks for everyone's help here and I guess I'll let you know what happens when it starts!!\\/

[dardoonk]

Just an update: The motor starts, so it must be okay..
I posted a video of the official starting here. It's on page two of my rebuild thread.

[chef1366]

Yeah baby!!!!!!!!!!!!!