Announcement

Collapse
No announcement yet.

Brake Squeal

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Brake Squeal

    The front brakes on my 1979 GS 750L like to squeal. Stopping ability is pretty good, but I hate the sqeal. Seems to be worse when it is hot outside.

    What would be a good upgrade for the front brakes on this bike.

    Thanks,

    Greg O.

    #2
    I get a slight squeal on my front brakes and I clean them with brake cleaner. Takes care of it for a week or so. I think it's caused by accumulation of brake dust or cheap pads.
    1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
    1985 GS1150ES stock with 85 Red E bodywork.

    Comment


      #3
      Chef,

      My discs are the solid type, are yours the vented type? I think they changed in 1980.

      Greg O.

      Comment


        #4
        Brake cleaner is your friend!!! remove the caliper; do NOT remove the brake line or release the fluid, remove the brake pads. thoroughly wash everything with the brake cleaner, apply a very light smear of "silastic" to rear of pads and re-assemble.

        Dink

        Comment


          #5
          Originally posted by Dink View Post
          Brake cleaner is your friend!!! remove the caliper; do NOT remove the brake line or release the fluid, remove the brake pads. thoroughly wash everything with the brake cleaner, apply a very light smear of "silastic" to rear of pads and re-assemble.

          Dink
          Silastic?
          Silicone grease is a good choice, applied very lightly, on the back side of the pads - lets the parts slide and not chatter which is what causes squeak.
          Ed

          To measure is to know.

          Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

          Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

          Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

          KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

          Comment


            #6
            I use the anti-squeal brake pad stuff they sell at the auto parts store and my brakes havent squeeked since.That's been about 2 years ago.I also take them out and clean them in brake cleaner every 3000 miles.

            Comment


              #7
              Is there a brake system that is better than the original equipment?

              Greg O

              Comment


                #8
                Thanks guys, I'll give it a try.

                Greg O

                Comment


                  #9
                  I put Vesrah pads on both of my bikes and they squealed like no other...I hated it!

                  I talked a bit with Michael Moore from Vintage Brake www.vintagebrake.com - the guys an older vintage bike racer, knows his stuff. He sold me a set of Ferodo Platinum pads for my 1100 and not only are they softest pad you can buy, they don't squeal.

                  I reccomend them hands down.

                  Michael also hooked me up with a pretty fair deal on some nice stainless steel brake lines. You can get the fittings cheaper through Parts Unlimited (any motorcycle dealer) but his lines were fair.

                  ~Adam

                  Comment

                  Working...
                  X