Announcement

Collapse
No announcement yet.

Anyone 4 out? + Hotter plug recomendations

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Anyone 4 out? + Hotter plug recomendations

    I am 3.5 out on my mixture screw and the popping is 99% gone. I was thinking about going to 4 to see if that gets it all gone. Is anyone else 4 out?

    Also I was looking for some hotter plug recommendations. Right now I am using NGKB8ES per the manual. They look ok but some black ring is forming on the bottom thread.

    #2
    I'm at 3+ on the 700. I figure the pilot jets need to be upped.

    Comment


      #3
      Yea I am thinking the same thing for me But in the short term I was gonna try 4 out and some NGK-BR8EIX plugs but they are $8 a pop lol

      Comment


        #4
        A hotter plug is not a solution...

        What color are the plug tips?

        Comment


          #5
          Originally posted by t3rmin View Post
          A hotter plug is not a solution...

          What color are the plug tips?
          Not just hotter better



          Its not a long term solution. Short term. I am going to replace the exhaust so I dont want to rejet now and then again latter.

          Comment


            #6
            Originally posted by mortation View Post
            They look ok but some black ring is forming on the bottom thread.
            It's not the color of the threads that matters. Check the color of the ceramic in the middle.


            .
            sigpic
            mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
            hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
            #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
            #2 son: 1980 GS1000G
            Family Portrait
            Siblings and Spouses
            Mom's first ride
            Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
            (Click on my username in the upper-left corner for e-mail info.)

            Comment


              #7
              Originally posted by Steve View Post
              It's not the color of the threads that matters. Check the color of the ceramic in the middle.


              .
              The ceramic in the middle is still white, the plugs are only like a week old. But the other "new" set I pulled out were black :P

              Comment

              Working...
              X