.png "Powered by vBulletin")
Just got a Dyna S for my '81 GS1100EX. Thought from looking at the installation instructions downloaded from Dynateks web site, that all i had to do is connect straight to the coils. Apparently, that is not the case. Instructions are telling me to connect to the same receptacle that the original pickup wires wer plugged into. Silly me. The wiring diagram I downloaded looked like I could skip the rest of that portion of ignition wiring and be done with it. I think my ignition problem originates in the "little black box" that the pickup wires run into. What do I need to do?
-
-
I would run the new wiring seperate from the old wires -
On my '83 1100E there is a module mounted on the right side of the bike near the battery box that must be disconnected. I believe the 81 1100E is very similar.
Thanks,
JoeIBA# 24077
'15 BMW R1200GS Adventure
'07 Triumph Tiger 1050 ABS
'08 Yamaha WR250R
"Krusty's inner circle is a completely unorganized group of grumpy individuals uninterested in niceties like factual information. Our main purpose, in an unorganized fashion, is to do little more than engage in anecdotal stories and idle chit-chat while providing little or no actual useful information. And, of course, ride a lot and have tons of fun.....in a Krusty manner."
Comment
-
Dyna S
Yep, it all works now. Skipped the "box". Had extra wires to my coils that did not show up on the downloaded wiring diagram. Multimeter and eyeballs helped me get hooked up correctly. Fired right up. Thanks for the quick responses, this site is going on my favorites list as of now.Comment
Comment