Announcement
Collapse
No announcement yet.
carb cleaning
Collapse
X
-
carb cleaning
An engineer friend of mine told me the best way to clean a carb is with an ultrasonic cleaner. Has anyone tried this?Tags: None
-
gaillarry
I use a small jewellery ultrasonic cleaner for small carb parts, jets, needles, etc. Works great.
-
Berrymans Chemtool carb dip works good enough.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
Imagine how good it would be if you filled your ultrasonic cleaner with Berryman's. :shock:
You could probably get all four carbs done in a couple of hours. \\/
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
RonP44
yes
the suzuki shop in plano texas has one. the medical industry has been using this tech for years..
Comment
-
GS1100GLMLA
Yes, ultrasonic cleaning would be one of the best ways to clean carburators. The ultrasonics has excellent capabilties for getting into blind holes and small cracks. As long as the chemistry you are using for cleaning is capable of emulsifying the varnish/oils.
Comment
-
neil young
try undiluted Simple Green.if you think im crazy try it you will never use anything else again.and for those that have never heard of it.it is a soap to clean your vehicle.it works better than yamaha carb cleaner and no where near as toxic and no nasty smell:-D
Comment
-
TheCafeKid
-
neil young
simple green will eat away at aluminum if left for days.it will strip paint when undiluted so be careful.
after soaking for a few hours rinse all parts really well then dry (preferably with a compressor)the aluminum parts will have a white powder on them just brush it off.
if you like you can dilute it with hot water and soak the whole body in it.
Comment
-
Sonic cleaning seems to be the way to go nowadays. I've never tried it though and have relied on a method shown by my father many years ago. Wait till the wife is out and simmer the dismantled carbs in a saucepan with a drop of washing up liquid - just a drop. Best to use an old pan as the remant fuel will taint the pan for cooking.
For a more modern alternative I have discovered Cilit Bang - household cleaner that the wife buys. I have no idea what's in it but it's a useful part of the cleaning armoury.
Wally79 GS1000S
79 GS1000S (another one)
80 GSX750
80 GS550
80 CB650 cafe racer
75 PC50 - the one with OHV and pedals...
75 TS100 - being ridden (suicidally) by my father
Comment
-
gaillarry
Lemon juice is also good. Boil the carbs in a large pot for about 10 mins. The acid in the juice does a good job, but make sure you rinse and blow dry after boiling. If left too long the acid can eat the aluminum.
Comment
Comment