Announcement

Collapse
No announcement yet.

Cheng Shin tires?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Cheng Shin tires?

    I have a Cheng Shin Marquis front tire on my 83 GS1100G that I've put over 1k miles on and the previous owner's miles on tire is unknown.
    My question is the way it wears- center part of tread seems raised over either side's tread and slightly cupped causing some wobble on turns especially highway ramps. A co worker also with the same tire on an 83 GS1100ES and seems to have the same wear pattern and same slight wobble on turns.
    Are these tires from this company crap?
    We both run them at 24 psi for front.
    I also notice they have a lighter shipping weight(by a few pounds for same tire size as other companies!!) on the online tire stores.
    Comments? They are cheaper but at a cost??

    #2
    I run CS Himax front and rear. and I have over 7.5k on them. no cupping. i run mine at 28psi and 36psi.

    the main thing that you do not get with these tires is long life. I'm probably going to be replacing mine with in the next 2k.

    also, the tire tread patterns are ripped off because china does not have international copy right law.

    Comment


      #3
      Plenty of people here will tell you Cheng Shin makes a great Tire. I disagree. I had the same wobble and weird wear pattern you do.
      I'm not rich, but coughing up the extra $20.00 each for better tires is the only way to go.

      Comment


        #4
        Low tire pressure also causes the tread wear pattern you're experiencing, it doesn't matter who you buy from. I run 30-32 psi in my front, I've got a Vetter fairing as well, but you've got a larger bike. The 24 psi in the manual is a little low.

        Comment


          #5
          I can not vouch for the Marquis line, but the Hi-Max line is pretty decent. 13,600 miles on the back of my wife's 850L and it's finally down to the wear bars. Front is not to the bars yet, but will be replaced at the same time, as it's not far behind.

          I agree that 24 is a bit low, but it depends on what the tire is rated for and how much of a load you are putting on it.
          For example:
          If the tire is rated to carry 500 pounds at a maximum inflation pressure of 30 psi, and you are putting 300 pounds on it, 24-26 might be appropriate for the load. However, if the tire is rated to carry 500 pounds at 40 psi, you will need 34-36 to do the job. This is why the suggested pressures printed on the bike are different for average- or high-speed riding, and riding solo or two-up.

          My wife is not the largest person around, but she is big enough to cast a shadow. She is not an aggressive rider and never carries a passenger. We keep the tire pressures about 26 in front and 30 in the rear, and there is no uneven wear in her tires.


          .
          sigpic
          mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
          hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
          #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
          #2 son: 1980 GS1000G
          Family Portrait
          Siblings and Spouses
          Mom's first ride
          Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
          (Click on my username in the upper-left corner for e-mail info.)

          Comment


            #6
            Originally posted by 8trackmind View Post
            Plenty of people here will tell you Cheng Shin makes a great Tire. I disagree. I had the same wobble and weird wear pattern you do.
            I'm not rich, but coughing up the extra $20.00 each for better tires is the only way to go.
            Total nonsense.

            Comment


              #7
              I bought a pair of Cheng Shin Hi Max tires and am quite happy with them but I've only got maybe 2,000 miles on them. I specifically stayed away from the Marquis because my web research uncovered way to many negative opinions about them while a lot of good stuff was found about the Mi Max.

              Comment


                #8
                Originally posted by lurch12_2000 View Post
                I have a Cheng Shin Marquis front tire on my 83 GS1100G that I've put over 1k miles on and the previous owner's miles on tire is unknown.
                My question is the way it wears- center part of tread seems raised over either side's tread and slightly cupped causing some wobble on turns especially highway ramps. A co worker also with the same tire on an 83 GS1100ES and seems to have the same wear pattern and same slight wobble on turns.
                Are these tires from this company crap?
                We both run them at 24 psi for front.
                I also notice they have a lighter shipping weight(by a few pounds for same tire size as other companies!!) on the online tire stores.
                Comments? They are cheaper but at a cost??

                I have heard bad things about the Marquis, but good things about HiMaxes...

                I just mounted a himax on the front of my FJ and I am doing the rear tomorrow. I have no problems if I can get 5-7k out of it...



                Originally posted by Grandpa View Post
                Total nonsense.
                can you elaborate a bit?

                Comment


                  #9
                  Originally posted by Grandpa View Post
                  Total nonsense.
                  Originally posted by NATEO View Post
                  can you elaborate a bit?
                  Ah, young Nate.[-X
                  If it's true wisdom you want, seek the elder.
                  The rest of us are only a diversion from the truth.
                  Last edited by Guest; 09-20-2007, 06:00 PM.

                  Comment


                    #10
                    Originally posted by Grandpa View Post
                    Total nonsense.
                    Yeah, those Chinese make great tires, pet food, and safe toys.

                    Comment


                      #11
                      Tasty!

                      Originally posted by Ninja_Lancer View Post
                      Yeah, those Chinese make great tires, pet food, and safe toys.
                      Yeah, but I think as long as you don't eat the tires, you'll probably be alright.:-D
                      1980 GS1100E, the latest of many.

                      Comment


                        #12
                        I went to the local motorcycle store and asked if they sold chens. The sales person responded "oh you mean chen slicks?" with a smirk on his face...this was a little disheartening. He said they were fine for cruisen, but definatley not a good choice for performance. When I had them on my GS1000 they seemed fine for moderate agressive riding, however I didnt push the bike hard enough to scrap anything either. I know the sales person might not have known jack...and was probably trying to sell me a more pricey tire. But for how much tires have to endure and keep that small contact patch on the road I just feel more confident now running a more expensive tire.

                        Comment


                          #13
                          i have cheng shins front and back on my gs1000e. i ride it pretty hard and the tires are holding up fairly well and they haven't slid out from under me or anything else scary. if i rode a gixxer i would buy something more expensive i guess but they're working fine on the old gs. also, i have the pressure at what it says on the tire, which i think is 42 psi.
                          2002 bmw r1150gs 1978 gs1000E skunk les pew 1979 gs1000L dragbike
                          82 gs1100L probably the next project
                          1980 gs1000G the ugly 1978 gs750E need any parts?
                          https://m.youtube.com/watch?v=m_m2oYJkx1A
                          1978 gs1000E skunk #2 RLAP
                          https://live.staticflickr.com/65535/...2f1debec_t.jpg

                          Comment


                            #14
                            Originally posted by Suzukfan78 View Post
                            I went to the local motorcycle store and asked if they sold chens. The sales person responded "oh you mean chen slicks?" with a smirk on his face...this was a little disheartening. He said they were fine for cruisen, but definatley not a good choice for performance. When I had them on my GS1000 they seemed fine for moderate agressive riding, however I didnt push the bike hard enough to scrap anything either. I know the sales person might not have known jack...and was probably trying to sell me a more pricey tire. But for how much tires have to endure and keep that small contact patch on the road I just feel more confident now running a more expensive tire.
                            You're right -- the sales guy does not know jack.

                            You people are idiots if you think that throwing more money automatically means a safer tire. Bwringer and I both ride aggressively and for long distances, and we regard the Cheng Shin HiMax as an excellent tire, and a good value for the money.

                            You "feel", eh? Stop feeling and go for hard evidence. Cheng Shin HiMax is more than an adequate tire for our GS bikes.

                            Comment


                              #15
                              Originally posted by rockford View Post
                              Yeah, but I think as long as you don't eat the tires, you'll probably be alright.:-D
                              Good one! :-D

                              Comment

                              Working...
                              X