.png "Powered by vBulletin")
Hoping somebody can give me an idea of who makes these camshafts. I have looked for casting numbers on the exhaust cam and all I see is EP-71 on the side opposite the tach worm gear, there is a CWC stamped on the cast along with a C-30 in larger stamping and a C-1 and finally a D-1...these are supposed to be performance aftermarket cams...just trying to figure out what I actually have....thanks
-
Last edited by Guest; 09-26-2007, 07:36 AM. -
The C-1 & D-1 tell me this is very likely a stock cam, measuring it to see if it has been reground or somesuch is about your only hope.
Dink -
If you have a tach worm gear on it chances are it's not stock. They made aftermarket 1100 and 1150 cams with the gear so the 1100s didn't lose the tach.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
My stock 1150 has a cam worm gear.
DinkComment
-
So the 1150s kept the mechanical tach gear but went with the electronic tach?Originally posted by Dink View Post
Sorry for my bogus info.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
I have 2 1150es. The 84 has a tach gear on the stock exhaust cam and the 85 does notComment
-
My 85 does.
DinkComment
Comment