comp. level ???

[GSX1100Norway]

Hi
Anyone that have any experience regarding higher comp. than the standard comp. on "street bike" projects ???
How did you do it and how mutch are a "slightly" increasing of the compression ??

KnutK

[isleoman]

Knut
Milling the head will raise comp a little. If you want to run pump gas without pinging I wouldn't go too far over 10.5.

[SqDancerLynn1]

If you start milling the head and making changes You MUST degree the cams, With the quality of todays gas I would stick with stock compression
unless you plan on using race gas which can get expensive

[chef1366]

If you start milling the head and making changes You MUST degree the cams, With the quality of todays gas I would stick with stock compression
unless you plan on using race gas which can get expensive

I think this is a step missed by most home brewed mechanics.

[BassCliff]

Hey howdy hey!

Mr. GSX1100Norway,

Let it be known that on this day you are hereby cordially and formally welcomed to the GSR Forum as a Junior Member in good standing with all the rights and privileges thereof. Please note that "good standing" implies pictures! :-D

Are you actually in Norway? Now that's a pretty short riding season. Thanks for joining us.

Thank you for your indulgence,

BassCliff
(The unofficial GSR greeter)

[GSX1100Norway]

Yes, I`m living in Norway, approx 100 km south east of Oslo in a small city named Horten .
( I`m working on the picture case.. )

This is a very nice forum to discuss our problems/projects with quick response and some good solutions for people worldwide like me that try to taking care of theyr old bike and some of us make a special edition of our bikes.
So, thank you for charing your experiance and nowledge with others.

Keep up the good work....:-D

KnutK