.png "Powered by vBulletin")
Originally posted by koolaid_kid
View Post
Would Pepsi work?
.
-
I would hate to waste (regular) Coke on spark plugs, even for a GS. :shock:
Would Pepsi work?
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.) -
eew don't feed your poor bike pepsi!
Comment
-
I sandblast by hand.
(with gloves of course)
This is a variant of the sprak plug cleaning machineYamaha fz1 2007Comment
-
what were the results?Comment
-
I just submerged my plugs in coke last night, left them in there overnight... it didn't do a thing.
Comment
-
You have to lick the Coke off...that's the whole idea.Originally posted by 79-GS550-L View PostI just submerged my plugs in coke last night, left them in there overnight... it didn't do a thing.
Hah, I just watched "Blow" last night, so that has a completely different meaning to me.Comment
-
Maybe the plugs wern't thirsty.Comment
-
Ok I guess that was a joke. I totally fell for it :-D Oh well. This morning I tried permatex gasket remover. You spray it on and it fizzes and bubbles... leave it on for a few mins and it turns into a gel. Then you can clean that away with some spray (brake parts cleaner, carb cleaner, electrical contact cleaner, whatever). It worked pretty well, it helps if you have a little brush (toothbrush, detailing brush) to get it right into the hole. It's still not quite as good as new, but it's the best thing I've found yet.
Oh, I tried Gunk carb dip too, that didn't do much for me either.Comment
Comment