Replacement master cylinder for GS1100?

[selecw]

Anyone know where I can get one - either OEM or after market?

My bike is an 82 1100EZ.

Thanks

[Nessism]

I don't think Suzuki sells a complete master cylinder anymore. Parts are available though so you can do a rebuild as long as the bore is clean. Dual disc masters are typically 16mm but I'm not sure about your bike in particular. I think that any master with the proper diameter will work - you may have to crimp a wire or two to get the brake light hooked up though.

[selecw]

Thanks. When you mention 16mm diameter, what component are you taking about?

[chef1366]

As long as it is for a dual disc and the brake line and bolt is the same size it will work.
Here is an aftermarket one.

[Nessism]

Thanks. When you mention 16mm diameter, what component are you taking about?

16mm is the inner diameter of the piston bore. 16mm is stock of a 550 with dual discs - not sure about your 1100.

If you go with a 14mm bore master cylinder the lever will have a more spongy feel but you will have reduced lever force for any given amount of braking force. 16mm will have a firmer lever feel but you will have to squeeze harder. Again, not sure what the stock size is so you need to do some research.