Oil Cooler Connections

[fouchie1]

Hi All
can anyone tell me the best way to connect the oil feed and return pipes on a GS1000s motor to fit an oil cooler, have seen pictures of various ways some people have done it, have seen some where they have feed and returned to the pressure switch and some from right hand side oil gallery retuning to oil filter, and do these need to be braided hoses or rubber and what sort of bore of pipe
rhanks
Les

[sharpy]

info

There is a getleman here in aust that makes these at a great price and are setup as standard to use normal hose connections (rubber hose) not as u see here. His name is terry and this is his email addy "sherriffbuck@yahoo.com" Hope this helps.

[DonL]

So how much does he want for one of these?

[JATO]

I bought one of them from Terry about three years ago and it works perfectly. I don't remember exactly what it was back then, but I'm sure it was under $100 US.

[fouchie1]

That looks good, but i have a second switch on my housing for oil temp aswell