Flasher Relay Queston

[gaillarry]

I'm restoring an 84 GS550E including re-wiring it. There are 3 wires going to the flasher relay, two are flat blade connectors and its obvious where they go, but theres a b/w female bullet connector in the same wiring strand but I can't find a male connector in the harness?

[Billy Ricks]

Black with a white tracer is just a ground. If you can't find the other end you could just ground it to the frame. Most of the relays really only have two wires going to them. One in and one out.

[gaillarry]

Thanks, that's another wiring problem solved, onto the next one!

[gaillarry]

Once I hooked up this one wire to ground (used the battery - post) all the lights now work, the starter relay, and starter work!!! I guess this one wire grounded the wiring harness.

[Billy Ricks]

Once I hooked up this one wire to ground (used the battery - post) all the lights now work, the starter relay, and starter work!!! I guess this one wire grounded the wiring harness.

Great, just remember that solid black is a positive turn signal wire and all black with white tracers are grounds.