Will these fit on a 1,000

[salty_monk]

http://cgi.ebay.com/ebaymotors/dragbike-suzuki-gs1150e-carburators-gs1100-gs1000_W0QQcmdZViewItemQQcategoryZ35595QQihZ019QQitemZ290172243434QQrdZ1QQsspagenameZWDVW

1150 carbs with dynojet & stock kit.

Dan

[chef1366]

Yes! Are you ready for some pods, pipes, big bore kit and cams?? \\/

Otherwise I think you know the answer. :-D

[salty_monk]

link might be useful to someone....

Dan

[rphillips]

Yes, as long as it's a later model GS 1000 that came with CV carbs

[renobruce]

Yes, they will fit on the later 1000, but it's too much carb for a stock motor. The 1150 carbs are 36mm.

[salty_monk]

Mostly just posting to get the link out there.... they might go cheap. I thought they would be a bigger carb rather than just a re-jetted CV from a 1,000. Have all the bits to rebuild mine now (or will when the next package from Flatout arrives!)

Bill - answer was only short as my wife was rushing me out the door

[rphillips]

I replaced the stock 34's, on a GS 1100, with a set of the 36's, & it really woke the thing up. Only other mod was a V&H 4 into 1.

[chef1366]

I replaced the stock 34's, on a GS 1100, with a set of the 36's, & it really woke the thing up. Only other mod was a V&H 4 into 1.

Did you have to down jet it?

[rphillips]

Gosh, I wish I could remember about the jetting, but I don't. It's been appx 22 yrs ago.