Announcement
Collapse
No announcement yet.
pin hole bubbles from engine case...
Collapse
X
-
Johnny K
pin hole bubbles from engine case...
Newb here who has a 82' GS850. My question is that the 1st and 2nd spark plug there is a bolt on the engine and in the crevice there are tiny little bubbles of oil coming out. Only a 10 min ride will look like the pics I have for you. Only happens when riding. Is the bike all done???????Tags: None
-
Johnny K
-
Johnny K
-
Johnny K
-
Johnny K
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35698
- Torrance, CA
Oil feeds up to the cams via clearance around the stud. That's the why there is a copper washer on the nut. You might want to retorque the head and check the condition of the washer on that stud.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Suzuki_Don
Originally posted by Johnny K View PostNewb here who has a 82' GS850. My question is that the 1st and 2nd spark plug there is a bolt on the engine and in the crevice there are tiny little bubbles of oil coming out. Only a 10 min ride will look like the pics I have for you. Only happens when riding. Is the bike all done???????
Hope this helps.
Cheers
Don
Comment
-
Johnny K
It's not coming from the bolt itself or the washer. It is coming from that crevice where if I do throttle I can see a tiny pin hole bubble with little oil, enough to drip to the fins. However from the second plug, I do not know where it is coming from, but it has just happened probably 2 weeks ago, that when I look down, I can see oil very slowly drip from my 2nd plug area on the case, down to the fins. Sorry bout the newb explanation. It is just bothersome to even ride because like I said a 10 min ride will have the oil slowly drip to the fins and then to the suzuki emblem and some on my pants and more so if I ride longer. Thanks again for suggestions and help.
John.
Comment
-
Originally posted by Johnny K View PostNewb here who has a 82' GS850. My question is that the 1st and 2nd spark plug there is a bolt on the engine and in the crevice there are tiny little bubbles of oil coming out. Only a 10 min ride will look like the pics I have for you. Only happens when riding. Is the bike all done???????:) The road to hell is paved with good intentions......................................
GS 850GN JE 894 10.5-1 pistons, Barnett Clutch, C-W 4-1, B-B MPD Ignition, Progressive suspension, Sport Demons. Sold
GS 850GT JE 1023 11-1 pistons. Sold
GS1150ES3 stock, V&H 4-1. Sold
GS1100GD, future resto project. Sold
http://i155.photobucket.com/albums/s...s/P1000001.jpg
http://i155.photobucket.com/albums/s...s/P1000581.jpg
Comment
-
Johnny K
The third and fourth pic is where the oil is coming from. The third pic is the 2nd plug. If you picture the crevice on the inside of the engine and not from the gasket itself, in the small corner of that crevice, it actually is a tiny pin hole that somehow leaks. The fourth picI know for certain that the crevice inward the plug is actually bubbling because I have seen it when I rev the engine. The bottom of the bolt where the crevice is on the engine is where oil seeps out by a tiny little pinhole bubble. If this helps.
Comment
-
Maybe it appears to be bubbling from the vibration and heat. Can't see how the oil can get up here unless it's a valve cover leak.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
Comment