Brake light question

[ZinMaker]

I just replaced my brake light switch and now for some reason my rear brake pedal switches the brake light on, however the brake handle for the front brake doesn't activate the brake light. Any comments please?

[lhanscom]

There is a place on the bottom of your front brake lever to adjust where the switch turns on. It has 2 screws and a wire coming out of it. Loosen the screws move it around and see it if fixes your problem.

[ZinMaker]

Thanks I was unaware of the screw, I'll go and take a look for it now, sounds like it could be the problem.

[Anonymous]

Which switch did you replace (front or rear)?

[Motorcyclemodeller]

Stock front lever brake switches are pretty tricky, the small copper slider can be crushed beyond repair if the replacement is not done properly, especially if the lever was removed from the perch. Open it back up and have a look.

8) Andre 8)