Announcement

Collapse
No announcement yet.

wes cooley gs1000s original? you tell me.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    wes cooley gs1000s original? you tell me.

    well here are some pics. I have more pics that I have to download should I bob it or not?
    vin#
    http://i231.photobucket.com/albums/ee281/elbasan/100_0800.jpg
    dash
    http://i231.photobucket.com/albums/ee281/elbasan/100_0794.jpg
    front wheel
    http://i231.photobucket.com/albums/ee281/elbasan/100_0792.jpg
    eng#
    http://i231.photobucket.com/albums/ee281/elbasan/100_0798.jpg
    speedo
    http://i231.photobucket.com/albums/ee281/elbasan/100_0793.jpg
    right side engine valvecover off to adjust valves
    http://i231.photobucket.com/albums/ee281/elbasan/100_0818.jpg
    left side engine
    http://i231.photobucket.com/albums/ee281/elbasan/100_0823.jpg
    rear right side bike

    brake light housing white

    bike left side with gastank and seat I got from a gs1000e

    this is the cover that came with the bike there are no holes

    there are two small dents.look like guides to drill holes but no holes

    #2
    The serial number on the frame is a S type number, but boy that's going to be a lot of work. And wheel barrows full of MONEY and time to find all the parts you will need.

    Comment


      #3
      ow, that left side pic sure makes those fork tubes look bent. Don't bob it! All the S bodywork is on ebay in England for a song. Mechanically, 1000E parts or aftermarket will be easy to find. Check the carbs to see if they are 26 or 28 mm inlets.

      Comment


        #4
        do you measure the inside or outside diameter on the inlets? forks are bent, I got a pair from the E.
        Last edited by Guest; 11-07-2007, 02:04 AM.

        Comment


          #5
          Looks like an S to me. I don't know what those tubes are coming up from the sides of the tail though. Sissy bar?
          85 GS1150E May '06 BOM
          79 GS1000S Wes Cooley Beast





          Comment


            #6
            My latest acquistion, an S, is only a tad better than yours looking at the photos (though mine runs and I have a decent fairing). It's certainly not going to be 'bobbed', but I won't be restoring to standard - you risk chasing that elusive part and paying a fortune for something just because it's original and originality has never scored high on my card. I reckon mine will look pretty standard to the 'untrained eye' when finished but will hopefully have some better bits on it.

            Wally
            79 GS1000S
            79 GS1000S (another one)
            80 GSX750
            80 GS550
            80 CB650 cafe racer
            75 PC50 - the one with OHV and pedals...
            75 TS100 - being ridden (suicidally) by my father

            Comment


              #7
              Originally posted by renobruce View Post
              Looks like an S to me. I don't know what those tubes are coming up from the sides of the tail though. Sissy bar?
              The tubes are for a pack frame

              Comment


                #8
                whats a pack frame.

                Comment


                  #9
                  Originally posted by hampshirehog View Post
                  I won't be restoring to standard - you risk chasing that elusive part and paying a fortune for something just because it's original

                  Wally
                  There's a mouthfull of truth right there.

                  Comment


                    #10
                    This is a pack frame/rack.
                    Noramlly it would be mounted on the tubes the other way around so you can carry someone on the bike with you.
                    Then you can carry your pack on the bike instead of your back.
                    Very common here in NZ.
                    Hope that answers your question mate.
                    Last edited by Guest; 06-11-2008, 05:36 PM.

                    Comment


                      #11
                      How much do you think it would go for on ebay?

                      Comment


                        #12
                        Originally posted by alvinsan View Post
                        How much do you think it would go for on ebay?
                        No idea mate!
                        Not even sure you can get them in the states.
                        Here in NZ that one is going for about $100 NZD around $70-80 USD

                        Comment

                        Working...
                        X