.png "Powered by vBulletin")
I do not see a number on the body to identify what size they are!
-
-
Measure the inner diameter of the intake(engine) side of the carb and that should be what size they are.Originally posted by GIABLO View Post -
I was hoping to avoid taking them off again, thanks!Comment
-
When Why Who and How:?1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
Seeing this a little late. If you see a part number on them anywhere I have a Mikuni tuning manual I can look in to see if the number is listed. For a liter bike they are either 36 or 38 mm.Comment
Comment