Need Advice for Re-Syncing Carbs

[mike_gs700e]

I just had my carbs cleaned out and have to install them back on the bike (85' gs700e). I don't really know what I am doing as far as re-syncing them goes so any advice is highly appreciated.

Thanks.

[Dave8338]

Do a good bench sync on them (do a search for this) or follow this link http://www.thegsresources.com/_forum...ght=bench+sync and then once things are up and running, follow with a vacuum sync and you should have it.

Also, I'd suggest that you set the valves first so that you know that everything is in spec, it makes things much easier.

[ScottMc1100L]

Hi Mike,

Here's a couple of links to saves threads I have. Should help a little. I'm not home until Monday so I can send you some other stuff from my home pc a bit later! BOL with the bike! I'd love to take it for a spin :-D when you get'r going!

http://www.thegsresources.com/_forum...d.php?t=107051
http://www.thegsresources.com/_forum...ad.php?t=97620

[mike_gs700e]

Thanks for the links, I will post an update when I get a chance to take a stab at syncing.


Scott, you are first in line for a ride, if you think you can handle it :-D.